Hopkins has a custom fit trailer wiring harness that fits your 2010 Lexus ES 350 with the part # HM11141930. This installs by plugging inline with your taillight connectors so it's a pretty simple install as well. view full answer...
At this time the only hitch we have available for the 2011 Lexus ES350, is the Curt Class II Receiver Hitch, item # 12343. Minor trimming of the underbody trim panel is required, but will not be visible once the hitch is installed unless viewed from the underside of the vehicle.
If you need a bike rack, I would recommend the Swagman XTC-2, item # S64670. This platform style rack makes loading and unloading the bikes simple and the ratcheting hooks make securing the bikes to the rack quick... view full answer...
The best-looking roof rack for your 2013 Lexus ES 350 is from Yakima and you can choose the color of crossbars you want, either black or silver. The rack consists of the following parts but please be aware there are no roof racks that fit your Lexus if it has a glass roof:
- Yakima JetStream Crossbars # Y00425 (Black)
- BaseLine Towers for Yakima Crossbars # Y28TR
- BaseClip Fit Kit # Y06175
- BaseClip Fit Kit # Y06160
And for a wind fairing a good fit for this rack on your Lexus is... view full answer...
The installation procedure for the Draw-Tite Class II Hitch, part # 36416 would be the same for your Lexus ES350 as it is for the Camry. The two holes will need to be drilled into the spare tire will. view full answer...
For your 12.5 foot long Porta-bote weighing 70 lbs, I recommend the Rhino-Rack Roof rack consisting of:
Vortex Aero Crossbars - Qty 2 # RRVA118B-2
2500 Series Legs - Qty 4 # RRRLKVA
Custom DK Fit Kit # DK234
Metal Lock Cores # RRVA-LEC4
Then for your carrier, I recommend the Rhino-Rack SUP and Surfboard Pads w/ Tie-Downs for Crossbars - Universal - 21-1/2" Long - Qty 2 # RRRWP03. This will allow you to secure your porta-bote to your crossbars. view full answer...
Yes, the Thule Passage trunk mount bike rack # TH910XT is listed as a fit for your 2009 Lexus ES 350. I have included a link to a video review of this bike rack for you.
If you will be carrying any bikes that do not have a top frame bar that goes straight across (like a typical men's bike would) then I recommend using bike adapter bar # 64005. This will allow you to carry those bikes more level and will provide better ground clearance. I have to use these adapters and without them my wife's... view full answer...
The Curt Trailer Hitch, part # C11362 is designed to fit a 2013 - 2016 Lexus ES 350, and 2013 - 2016 Lexus ES 300h Hybrid. If this is the vehicle you are asking about then the C11362 will work for you. It does require permanent removal of the heat shield.
If you have an ES 350 model, we do offer an alternative. You can use the Draw-Tite Trailer Hitch, part # 36530. This is a Class ll hitch and it has a 1-1/4 inch receiver opening. The installation of this hitch requires the temporary removal... view full answer...
Curt offers a Class II hitch, part # C12343 that is a confirmed fit for your 2009 Lexus ES350. Curt tells me that this hitch will also fit a 2009 Camry. If you click the link I've provided, you can see an install video.
At one time, Draw-Tite considered the hitch a fit for the Lexus ES 350. However, they no longer consider the hitch a fit and do not recommend attempting to install it on that vehicle. view full answer...
There is no specific route to take or a right or wrong way to run the power wire to the battery when installing wiring harness # 118488 on your 2007 Lexus ES 350. Basically, there are a few different methods that you can use to route the power wire depending on what works best for you.
The easiest way is to route the wire down, under the vehicle, follow along a frame rail or existing harness, up to the front of the vehicle, and up through the engine compartment to the battery (on vehicles... view full answer...
The Thule WingBar Evo Crossbar System part # TH711420, and part # TH710501, and part # TH145149 is what I recommend for a 2013 Lexus ES 350 as it's the quietest roof rack on the market. There won't be any fit issues with the sunroof either.
In order to secure a kayak, the etrailer J-Style Kayak Carrier part # e98878 is a great all inclusive option which because it saves space will allow you to add another kayak down the road if needed or even a bike rack. view full answer...
For your 2011 Lexus ES 350, the only available hitches are Class II 1-1/4 hitch receivers. Technology has advanced where 2" hitches are being designed for newer models, but for your vehicle, a Class II is as good as it gets.
The only solution here would be to use a hitch adapter # 80303 to turn your 1-1/4" into a 2" hitch. I would be cautious though, since this method halves your hitch capacity. Instead of 300lbs tongue weight, you will have 150 lbs tongue weight capacity. Rad Electric... view full answer...
We have confirmed with Draw Tite that the hitch part # 36530 is a confirmed fit for your 2016 Lexus ES 350. In some cases we have seen trailer hitches get bent in shipping and have that cause an issue for getting the hitch to bolt up but typically the hitches can be bent back to allow the hole to line up as long as there is no paint flaking or creasing of the hitch.
With the large mounting flanges that the hitches that fit your vehicle have I could see their hitch possible being bent and... view full answer...
As long as there's no visible damage to the pin for the breakaway switch, you can certainly reuse it. If you need to replace it the pin/lanyard, we offer them as part # 3802350
. view full answer...
Sure thing! The Ultra-Fab Deluxe landing gear, part # UF17-943010, wiring is actually pretty straightforward once you know which wire is which by color. The switches and the motors both have red and black wires. Those need to be connected to each other matching the colors. Then the white wires from the switches go to the positive battery post through the fuse holder and the green wires need to be grounded to a good ground location or the negative battery post.
Check out the picture I attached... view full answer...
I have a better solution for you, a hitch mounted bike rack would allow you to transport bikes without having anything at all contact the vehicle paint on your new Lexus EX 350.
For a hitch you would want the Curt Hitch part # C11362. You should note that Curt says all non-trailer loads - bike racks, cargo carriers and so forth - should be supported with stabilizing straps. Failure to properly support these loads will void your hitch warranty from Curt. For that you would need the part... view full answer...
The Yakima JetStream Crossbar System composed of part # Y00425, part # Y28TR, part # Y06175, and part # Y06160 is a confirmed fit 2013 Lexus ES 350 and a great option for carrying kayaks. In order to secure both kayaks, you'd need a few sets of j-style carriers for which I recommend the etrailer Kayak Roof Rack part # e98878. These are complete carriers that come with everything you need to secure the kayaks like tie-downs.
Please note, you should not open the sun roof with the roof rack... view full answer...
I recommend using the Class II Draw-Tite Trailer Hitch # 36530 to carry your 2 E-Bikes with the Thule EasyFold XT # TH903202 on your 2018 Lexus ES 350.
I have attached an installation video and the instructions that you can check out. view full answer...
Yes, there is! Since your 2024 Lexus ES 350 does not have rails or the glass roof top you can use the roof rack by Yakima which includes the following parts:
Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y89UV
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06143
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06170
This aero bar roof rack system has a 165 lbs capacity. I have attached a couple... view full answer...
From the rearmost hitch pin hole to the face of the Shocker Hitch Impact Cushioned Adjustable Clevis # SHK93RR ball mount is 8-3/8" (see bottom right figure of attached photo). If you're wanting to know what the distance is to the back side of the ball mount that is 4-1/2" instead (see bottom left figure of attached photo).
The "face of the hitch" is a phrase that's used interchangeably for different things so if you were talking about something else just let me know! view full answer...
According to Yakima, a roof rack consisting of the # Y00409 crossbars, # Y00124 Q Towers and # Y00696 and # Y00606 Q clips is compatible with your 2008 Lexus ES350 with a sunroof. The fact that your ES350 has a sunroof will not affect or interfere with the fit. According to Yakima, once the rack is installed on your vehicle roof, it will have a 100 lb capacity.
I have linked you to our Roof Rack FAQ article, which contains more information about roof racks. view full answer...